OCCUPANT DETECTION SENSOR REMOVAL


  1. PRECAUTION (w/ Navigation System for HDD)

    Note

    After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

  2. REMOVE REAR NO. 2 FLOOR BOARD


    1. A01JB5ZE01

      Disengage the 2 guides <A> as shown in the illustration.

    2. Disengage the 3 guides <B> and remove the rear No. 2 floor board.

  3. REMOVE REAR DECK FLOOR BOX


    1. Remove the rear deck floor box.

  4. REMOVE REAR NO. 3 FLOOR BOARD


    1. A01JC33

      Disengage the 2 guides and remove the rear No. 3 floor board.

  5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. REMOVE FRONT SEAT HEADREST ASSEMBLY

    Tech Tips

    Use the same procedure described for the LH side Click here.

  7. REMOVE OUTER SEAT TRACK COVER

    Tech Tips

    Use the same procedure described for the LH side Click here.

  8. REMOVE INNER SEAT TRACK COVER

    Tech Tips

    Use the same procedure described for the LH side Click here.

  9. REMOVE FRONT SEAT ASSEMBLY

    Tech Tips

    Use the same procedure described for the LH side Click here.

  10. REMOVE RECLINING ADJUSTER RELEASE HANDLE

    Tech Tips

    Use the same procedure described for the LH side Click here.

  11. REMOVE VERTICAL ADJUSTING HANDLE (w/ Vertical Adjuster)

    Tech Tips

    Use the same procedure described for the LH side Click here.

  12. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY

    Tech Tips

    Use the same procedure described for the LH side Click here.

  13. REMOVE FRONT SEAT INNER BELT ASSEMBLY

    Tech Tips

    Use the same procedure described for the LH side Click here.

  14. REMOVE FRONT SEAT CUSHION INNER SHIELD

    Tech Tips

    Use the same procedure described for the LH side Click here.

  15. REMOVE FRONT SEAT CUSHION COVER WITH PAD

    Tech Tips

    Use the same procedure described for the LH side Click here.

  16. REMOVE OCCUPANT DETECTION SENSOR


    1. A01JAUA

      Remove the 2 hog rings.

    2. A01J8MM

      Remove the 11 hog rings and separate type front seat cushion cover.