REAR SEAT INNER BELT ASSEMBLY (for RH Side) INSTALLATION


  1. INSTALL REAR SEAT INNER BELT ASSEMBLY RH


    1. A01JA01E01
      Text in Illustration
      *1 Protruding Part

      Install the rear seat inner belt assembly RH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear seat inner belt assembly RH to overlap onto the protruding part of the floor panel.

  2. INSTALL REAR SEAT INNER BELT ASSEMBLY RH (for Buckle with Switch)


    1. A01JD87E01
      Text in Illustration
      *1 Protruding Part

      Install the rear seat inner belt assembly RH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear sear inner belt assembly RH to overlap onto the protruding part of the floor panel.

    2. Engage the clamp to connect the connector.

  3. INSTALL REAR SEATBACK ASSEMBLY RH (for Buckle with Switch)


    1. Place the rear seatback assembly RH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A01JCEH

      Install the rear seatback assembly RH with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }
    3. A01JBDDE01
      Text in Illustration
      *1 Fastener

      Engage the fastener.

  4. CONNECT REAR CENTER SEAT BELT ASSEMBLY


    1. A01JAONE01
      Text in Illustration
      *1 Protruding Part

      Connect the anchor part of the rear seat inner belt assembly.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear center seat belt assembly to overlap the protruding part of the rear seat inner belt assembly RH.

  5. INSTALL REAR SEAT HEADREST ASSEMBLY (for Buckle with Switch)


    1. A01J8ZG

      Install the rear seat headrest assembly RH as shown in the illustration.

  6. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (for Buckle with Switch)


    1. A01JCP6

      Install the rear seat center headrest assembly as shown in the illustration.

  7. INSTALL REAR SEAT CUSHION ASSEMBLY


    1. A01JCUFE01
      Text in Illustration
      *1 100 mm (3.94 in.) or less
      *2 Guide
      *3 Hook

      Engage the 2 guides of the seat cushion to the seatback.

    2. Engage the 2 front hooks of the seat cushion to the vehicle body.

      Note

      When installing the seat cushion, make sure that the seat belt buckle is not under the seat cushion.

      Tech Tips

      Confirm that the seat cushion is firmly installed.