REAR SEAT INNER BELT ASSEMBLY (for LH Side) INSTALLATION


  1. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH


    1. A01JCLRE01
      Text in Illustration
      *1 Protruding Part

      Install the rear seat inner with center belt assembly LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear seat inner with center belt assembly LH to overlap onto the protruding parts of the floor panel.

  2. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for Buckle with Switch)


    1. A01JAYIE01
      Text in Illustration
      *1 Protruding Part

      Install the rear seat inner with center belt assembly LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear seat inner with center belt assembly LH to overlap onto the protruding parts of the floor panel.

    2. Engage the clamp to connect the 2 connectors.

  3. INSTALL REAR SEATBACK ASSEMBLY LH (for Buckle with Switch)


    1. Place the rear seatback assembly LH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A01JBEW

      Install the rear seatback assembly LH with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }
    3. A01JBLGE01
      Text in Illustration
      *1 Fastener

      Engage the fastener.

  4. INSTALL REAR SEAT HEADREST ASSEMBLY (for Buckle with Switch)


    1. A01JCK0

      Install the rear seat headrest assembly LH as shown in the illustration.

  5. INSTALL REAR SEAT CUSHION ASSEMBLY


    1. A01JCUFE01
      Text in Illustration
      *1 100 mm (3.94 in.) or less
      *2 Guide
      *3 Hook

      Engage the 2 guides of the seat cushion to the seatback.

    2. Engage the 2 front hooks of the seat cushion to the vehicle body.

      Note

      When installing the seat cushion, make sure that the seat belt buckle is not under the seat cushion.

      Tech Tips

      Confirm that the seat cushion is firmly installed.