REAR SEAT INNER BELT ASSEMBLY (for LH Side) INSPECTION


  1. INSPECT REAR SEAT INNER BELT ASSEMBLY (for LH Side)

    A01JC87E04
    Text in Illustration
    *1

    Component without harness connected

    (Rear Seat Inner Belt Assembly (LH Side and Center))

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (LBR+) - 2 (E) Rear seat belt LH fastened Below 1 Ω
      1 (LBR+) - 2 (E) Rear seat belt LH not fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner belt assembly (LH side and center).

  2. INSPECT REAR SEAT INNER BELT ASSEMBLY (for Center)

    A01JBGQE01
    Text in Illustration
    *1

    Component without harness connected

    (Rear Seat Inner Belt Assembly (LH Side and Center))

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (CBR+) - 2 (E) Rear center seat belt fastened Below 1 Ω
      1 (CBR+) - 2 (E) Rear center seat belt not fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner belt assembly (LH side and center).