SEAT BELT WARNING SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Combination Meter or Main Body / Data List.

    5. Read the Data List according to the display on the intelligent tester.

      Combination Meter (Combination Meter Assembly)
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      P-Seatbelt Buckle SW Front passenger side seat belt buckle switch signal/ON or OFF

      ON: Front passenger side seat belt fastened.

      OFF: Front passenger side seat belt not fastened.

      		 -
      2nd-Row Seatbelt Buckle (R)* Rear RH side seat belt buckle switch signal/ON or OFF

      ON: Rear RH side seat belt fastened.

      OFF: Rear RH side seat belt unfastened.

      		 -
      2nd-Row Seatbelt Buckle (L)* Rear LH side seat belt buckle switch signal/ON or OFF

      ON: Rear LH side seat belt fastened.

      OFF: Rear LH side seat belt unfastened.

      		 -
      2nd-Row Seatbelt Buckle (C)* Rear center seat belt buckle switch signal/ON or OFF

      ON: Rear center seat belt fastened.

      OFF: Rear center seat belt unfastened.

      		 -
      Driver Side Seatbelt Warning Buzzer Driver side seat belt warning buzzer/ON or OFF Customized value displayed -
      P-Seatbelt Warning Buzzer Front passenger side seat belt warning buzzer/ON or OFF Customized value displayed -
      Rear Seat Belt Warning Buzzer* Rear seat belt warning buzzer/OFF or ON Customized value displayed -

      *: w/ Rear Seat Belt Warning

      Main Body (Main Body ECU (Multiplex Network Body ECU))
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      RR Door Courtesy SW Rear door courtesy switch signal/ON or OFF

      ON: Rear door LH or RH open.

      OFF: Rear door LH and RH closed.

      		 -
      RL Door Courtesy SW Rear door courtesy switch signal/ON or OFF

      ON: Rear door LH or RH open.

      OFF: Rear door LH and RH closed.

      		 -
      D Seat Buckle SW Driver seat belt buckle switch signal/ON or OFF

      ON: Driver seat belt fastened

      OFF: Driver seat belt not fastened

      		 -

  2. ACTIVE TEST

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Combination Meter / Active Test.

    5. Perform the Active Test according to the display on the intelligent tester.

      Combination Meter (Combination Meter Assembly)
      Tester Display Test Part Control Range Diagnostic Note
      Driver Side Seat Belt Driver side seat belt warning light OFF or ON Confirm that the vehicle is stopped with the engine idling.
      Front Passenger Side Seat Belt Front passenger side seat belt warning light OFF or ON Confirm that the vehicle is stopped with the engine idling.