FRONT SEAT CUSHION HEATER (for Power Seat) INSTALLATION


  1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY (SEPARATE TYPE FRONT SEAT CUSHION COVER)


    1. A01JD57

      Using hog ring pliers, install the front seat cushion heater assembly (separate type front seat cushion cover) to the separate type front seat cushion pad with 11 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A01JCZH

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. Engage each hook to install the separate type front seat cushion cover with pad to the front seat cushion spring sub-assembly as shown in the illustration.

      A01JD5H
    2. A01JCYO

      Engage the 2 hooks as shown in the illustration.

    3. A01J9EZ

      Engage the fastener to connect the side airbag wire harness.

    4. Connect the connector and engage the clamp to connect the seat heater wire harness.

    5. A01JAD1

      Engage the 3 clamps to connect the seat heater wire harness.

    6. A01JDC9

      Engage the 4 hooks.

    7. A01JAJ0

      Connect the rubber band.

  3. INSTALL FRONT INNER SEAT CUSHION SHIELD


    1. A01JCB4

      Engage the 5 claws and install the front inner seat cushion shield.

  4. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY


    1. A01JAE0E01
      Text in Illustration
      *1 Clamp
      *2 Hook

      Connect the 2 connectors.

    2. Engage the clamp and hook as shown in the illustration.

    3. A01JABC

      Engage the guide and 4 claws as shown in the illustration.

    4. Engage the clip to install the front seat cushion shield assembly.

    5. A01JB1O

      Engage the 6 clamps.

    6. Connect the 4 connectors.

  5. INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD


    1. A01JCD9

      Engage the 2 claws and clip.

    2. Engage the guide to install the front inner No. 1 seat cushion shield to the front seat cushion shield with the screw.

  6. INSTALL FRONT SEAT INNER BELT ASSEMBLY


    1. A01JCUYE01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Connect each connector.

    3. Engage each clamp.

  7. INSTALL FRONT SEAT ASSEMBLY

    Click here