SEAT HEATER SWITCH INSPECTION


  1. INSPECT SEAT HEATER SWITCH


    1. A01J8X9E03

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      L26-5 (IG) - L26-6 (LH) "L" switch off 10 kΩ or higher
      L26-5 (IG) - L26-6 (LH) "L" switch on Below 1 Ω
      L26-4 (IG) - L26-3 (RH) "R" switch off 10 kΩ or higher
      L26-4 (IG) - L26-3 (RH) "R" switch on Below 1 Ω

      If the result is not as specified, replace the seat heater switch.

    2. Turn the seat heater switch on and check if the seat heater switch indicator comes on.

      OK
      Connection Switch Condition Specified Condition

      Battery positive (+) → L26-5 (IG)

      Battery negative (-) → L26-2 (E)

      		 "L" switch on Comes on

      Battery positive (+) → L26-4 (IG)

      Battery negative (-) → L26-2 (E)

      		 "R" switch on Comes on

      If the result is not as specified, replace the seat heater switch.

    3. Check if the seat heater switch comes on.

      OK
      Connection Switch Condition Specified Condition

      Battery positive (+) → L26-7 (ILL+)

      Battery negative (-) → L26-8 (ILL-)

      		 Always Comes on

      If the result is not as specified, replace the seat heater switch.