FRONT SEATBACK HEATER (for Power Seat) INSTALLATION


  1. INSTALL FRONT SEATBACK HEATER ASSEMBLY (SEPARATE TYPE FRONT SEATBACK COVER)


    1. A01JBNYE01
      Text in Illustration
      *1 Fastening Rubber
      *2 Hog Ring

      Using hog ring pliers, connect the fastening rubber to the separate type front seatback pad with 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A01J8RG

      Using hog ring pliers, install the front seatback heater assembly (separate type front seatback cover) to the separate type front seatback pad with 5 new hog rings

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. Temporarily install the separate type front seatback cover with pad to the front seatback spring sub-assembly.

    2. A01JAZO

      Engage the 4 claws and install the 2 front seat headrest supports.

    3. A01J8WJE01

      Install the separate type front seatback cover bracket with the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note


      • For vehicles with side airbags, the side airbags may not be activated normally unless the front seatback cover is securely installed.

      • Check that the strap is not twisted after installing the bracket.

      • Install the bracket securely.

    4. A01J9WS

      Engage the 2 hooks.

    5. A01JD18E01
      Text in Illustration
      *1 Fastening Rubber

      Using hog ring pliers, install the fastening rubber to the front seatback spring with 3 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    6. A01JAOF

      Close the 2 fasteners.

    7. A01JA0H

      Push in the lower part of 2 fasteners to the separate type front seatback cover as shown in the illustration.

    8. A01J8PU

      Using hog ring pliers, install 3 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    9. A01JD0O

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  3. INSTALL FRONT SEAT ASSEMBLY

    Click here