LUMBAR SWITCH (for Power Seat) INSPECTION


  1. INSPECT POWER SEAT SWITCH ASSEMBLY


    1. A01JB9KE11
      Text in Illustration
      *1 Release Switch
      *2 Hold Switch
      *a

      Component without harness connected

      (Power Seat Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 5 Hold Below 1 Ω
      3 - 2
      1 - 2 Off
      3 - 2
      1 - 2 Release
      3 - 5

      If the result is not as specified, replace the power seat switch assembly.