LUMBAR SWITCH (for Manual Seat) INSPECTION


  1. INSPECT LUMBAR SWITCH (for LHD)


    1. A01JB6IE15
      Text in Illustration
      *1 Hold
      *2 Release
      *3

      Component without harness connected

      (Lumbar Switch LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Hold Below 1 Ω
      1 - 2 Off Below 1 Ω
      1 - 2 Release 10 kΩ or higher
      3 - 4 Hold Below 1 Ω
      3 - 4 Release 10 kΩ or higher
      5 - 4 Hold 10 kΩ or higher
      5 - 4 Off Below 1 Ω
      5 - 4 Release Below 1 Ω
      1 - 3 Hold 10 kΩ or higher
      1 - 3 Release Below 1 Ω

      If the result is not as specified, replace the lumbar switch.

  2. INSPECT LUMBAR SWITCH (for RHD)


    1. A01JC2VE03
      Text in Illustration
      *1 Hold
      *2 Release
      *3

      Component without harness connected

      (Lumbar Switch RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Hold Below 1 Ω
      1 - 2 Off Below 1 Ω
      1 - 2 Release 10 kΩ or higher
      3 - 4 Hold Below 1 Ω
      3 - 4 Release 10 kΩ or higher
      5 - 4 Hold 10 kΩ or higher
      5 - 4 Off Below 1 Ω
      5 - 4 Release Below 1 Ω
      1 - 3 Hold 10 kΩ or higher
      1 - 3 Release Below 1 Ω

      If the result is not as specified, replace the lumbar switch.