FRONT SEAT ASSEMBLY (for Manual Seat) REASSEMBLY


  1. INSTALL FRONT SEAT SIDE AIRBAG ASSEMBLY

    CAUTION:


    • The nuts must not be reused.

    • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.


    1. Install the front seat side airbag assembly with 2 new nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Engage the 2 clamps.

  2. INSTALL SEAT TRACK ADJUSTING HANDLE


    1. A01J8RY

      Engage the 2 hooks to install the seat track adjusting handle.

  3. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY (w/o Lumbar Support)


    1. A01JCMD

      Install the separate type front seatback assembly with the 4 bolts.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  4. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY (w/ Lumbar Support)


    1. A01JBF4

      Install the separate type front seatback assembly with the 4 bolts.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  5. INSTALL FRONT SEAT WIRE (w/ Lumbar Support)


    1. A01J95H

      Engage the 2 clamps and install the front seat wire.

    2. Connect the connector.

  6. INSTALL NO. 1 FRONT SEAT CUSHION PROTECTOR


    1. A01JCVF

      Engage the 2 guides and install the No. 1 front seat cushion protector with the screw.

  7. INSTALL NO. 2 FRONT SEAT CUSHION PROTECTOR


    1. A01JARQ

      Engage the 2 guides and install the No. 2 front seat cushion protector with the screw.

  8. INSTALL FRONT SEAT LOWER CUSHION SHIELD RH (w/ Vertical Adjuster)


    1. A01JBB0

      Engage the clip and install the screw.

    2. A01J9PG

      Engage the hook and install the front seat lower cushion shield RH as shown in the illustration.

  9. INSTALL FRONT SEAT LOWER CUSHION SHIELD LH (w/ Vertical Adjuster)


    1. A01JC1T

      Engage the clip and install the screw.

    2. A01J8S6

      Engage the hook and install the front seat lower cushion shield LH as shown in the illustration.

  10. INSTALL RECLINING ADJUSTER INSIDE COVER RH


    1. A01J8FB

      Engage the guide and install the reclining adjuster inside cover RH.

  11. INSTALL RECLINING ADJUSTER INSIDE COVER LH


    1. A01J979

      Engage the guide and install the reclining adjuster inside cover LH.

  12. INSTALL SEPARATE TYPE FRONT SEATBACK COVER


    1. A01JBLV

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A01J8RG

      Using hog ring pliers, install 5 new hog rings

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  13. INSTALL FRONT SEATBACK COVER WITH PAD


    1. A01JCNR

      Install the front seatback cover bracket with the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note


      • For vehicles with side airbags, the side airbags may not be activated normally unless the front seatback cover is securely installed.

      • Check that the strap is not twisted after installing the bracket.

      • Install the bracket securely.

    2. A01JAZO

      Engage the 4 claws and install the 2 front seat headrest supports.

    3. A01JD2S

      Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 3 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  14. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01JD57

      Using hog ring pliers, install 11 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A01JCZH

      Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  15. INSTALL FRONT SEAT CUSHION COVER WITH PAD


    1. Engage each hook as shown in the illustration.

      A01J98X
    2. A01JBYL

      Engage the 2 hooks as shown in the illustration.

    3. A01J9EB

      Using hog ring pliers, install 3 new hog rings

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    4. for Passenger Side:


      1. A01JBF5

        Engage the guide and install the belt warning occupant detection sensor.

      2. A01JDA4

        Engage the 3 clamps.

      3. Connect the connector.

    5. A01J9KL

      Engage the 4 hooks.

    6. w/ Seat Heater System:


      1. A01JCCI

        Engage the clamp.

      2. A01JAAJ

        Fasten the front seat cushion cover with pad as shown in the illustration.

      3. Connect the connector.

    7. w/ Lumber support:


      1. A01JAZP

        Engage the 4 clamps.

      2. A01JCQZ

        Engage the 3 clamps and connect the connector.

    8. A01JAJH

      Engage the hook and install the front seat cushion cover with pad.

  16. INSTALL FRONT SEAT CUSHION INNER SHIELD


    1. A01JAD7

      Engage the 2 claws and install the front seat cushion inner shield.

  17. INSTALL FRONT SEAT INNER BELT ASSEMBLY


    1. A01JBTEE01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Connect each connector.

    3. Engage each clamp.

  18. INSTALL LUMBAR SWITCH (w/ Lumbar Support)


    1. A01J9PV

      Install the lumbar switch with the 2 screws.

  19. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY


    1. w/ Lumber Support:


      1. A01JAOR

        Disengage the 5 clamps.

      2. Connect the connector.

    2. A01JCR1

      Engage the clip and 2 claws.

    3. Install the front seat cushion shield assembly with the screw.

  20. INSTALL VERTICAL ADJUSTING HANDLE (w/ Vertical Adjuster)


    1. A01J9YL

      Install the vertical adjusting handle with the screw.

  21. INSTALL RECLINING ADJUSTER RELEASE HANDLE


    1. A01JCPN

      Engage the claw and install the reclining adjuster release handle.