FRONT SEAT ASSEMBLY (for Manual Seat) REMOVAL


  1. PRECAUTION (w/ Navigation System for HDD)

    CAUTION:


    • Be sure to read Precaution thoroughly before servicing Click here.

    • If the side airbag was deployed, replace the front seat airbag assembly, separate type front seatback spring assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

  2. REMOVE REAR NO. 2 FLOOR BOARD


    1. A01JB5ZE01

      Disengage the 2 guides <A> as shown in the illustration.

    2. Disengage the 3 guides <B> and remove the rear No. 2 floor board.

  3. REMOVE REAR DECK FLOOR BOX


    1. Remove the rear deck floor box.

  4. REMOVE REAR NO. 3 FLOOR BOARD


    1. A01JC33

      Disengage the 2 guides and remove the rear No. 3 floor board.

  5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. REMOVE FRONT SEAT HEADREST ASSEMBLY


    1. A01JBSO

      Press the headrest support button and pull up the headrest as shown in the illustration to remove it.

  7. REMOVE OUTER SEAT TRACK COVER


    1. A01J9SP

      Lift up the seat track adjusting handle and move the seat to the foremost position.

    2. Disengage the 2 claws and remove the outer seat track cover.

  8. REMOVE INNER SEAT TRACK COVER


    1. Disengage the claw.

    2. A01JBVL

      Separate the guide and remove the inner seat track cover.

  9. REMOVE FRONT SEAT ASSEMBLY


    1. A01J916

      Remove the 2 bolts on the rear side of the seat.

    2. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    3. A01JATS

      Remove the 2 bolts on the front side of the seat.

    4. Lift up the seat track adjusting handle and move the seat to the center position. Also, operate the reclining adjuster release handle and move the seatback to the upright position.

    5. Disconnect the connectors under the seat.

    6. Remove the seat.

      Note

      Be careful not to damage the vehicle body.