SEAT BELT CONTROL ECU INSTALLATION


  1. INSTALL SEAT BELT CONTROL ECU (for LHD)


    1. A01JCQD

      Engage the 2 claws to install the seat belt control ECU.

  2. INSTALL SEAT BELT CONTROL ECU (for RHD)


    1. A01JC4E

      Engage the 2 claws to install the seat belt control ECU.

  3. INSTALL ECU INTEGRATION BOX RH (for LHD)


    1. Connect each connector.

    2. A01JBZF

      Install the ECU integration box RH with the bolt and 2 nuts.

  4. INSTALL ECU INTEGRATION BOX LH (for RHD)


    1. Connect each connector.

    2. A01J9AI

      Install the ECU integration box LH with the bolt and nut.

  5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY


    1. A01JAP5E01
      Text in Illustration
      *a Opened Approximately 55°
      *b Closed

      With the glove compartment door assembly opened approximately 55° from its closed position, engage the 2 hinges horizontally.

      Note

      Engaging the hinges from the top will deform the hinges. Be sure to install the glove compartment door assembly horizontally.

    2. A01JD6GE01
      Text in Illustration
      *1 Glove Compartment Door Stopper Sub-assembly
      *2 Stopper

      Slightly bend the stoppers (A) and (B) in the directions indicated by the arrows in the illustration and engage the stoppers to install the glove compartment door assembly.

    3. Engage the claw and connect the glove compartment door stopper sub-assembly.

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. INSTALL REAR NO. 3 FLOOR BOARD


    1. A01JC33

      Engage the 2 guides to install the rear No. 3 floor board.

  8. INSTALL REAR DECK FLOOR BOX


    1. Install the rear deck floor box.

  9. INSTALL REAR NO. 2 FLOOR BOARD


    1. A01JCWRE01

      Engage the 3 guides <A>.

    2. Engage the 2 guides <B> and install the rear No. 2 floor board as shown in the illustration.