RELAY ON-VEHICLE INSPECTION


  1. INSPECT INSTRUMENT PANEL ILLUMINATION RELAY (PANEL)


    1. A01JCHPE86

      Remove the PANEL relay.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the PANEL relay.