BACK DOOR COURTESY SWITCH REMOVAL


  1. REMOVE REAR NO. 2 FLOOR BOARD


    1. A01JB5ZE01

      Disengage the 2 guides <A> as shown in the illustration.

    2. Disengage the 3 guides <B> and remove the rear No. 2 floor board.

  2. REMOVE REAR DECK FLOOR BOX


    1. Remove the rear deck floor box.

  3. REMOVE REAR DOOR SCUFF PLATE LH


    1. A01JA7L

      Disengage the 7 claws and remove the rear door scuff plate LH.

  4. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

  5. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. A01JC67E01
      Text in Illustration
      *1 100 mm (3.94 in.) or less
      *2 Hook
      *3 Guide

      Disengage the 2 front hooks of the seat cushion from the vehicle body as shown in the illustration.

      Note

      Follow the instructions below carefully as the cushion frame deforms easily.


      1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

      2. Repeat the above procedure for the other hook.

    2. Disengage the 2 guides of the seat cushion from the seatback.

    3. Remove the rear seat cushion assembly.

  6. REMOVE REAR SIDE SEATBACK ASSEMBLY LH


    1. A01J9D6

      Remove the bolt.

    2. A01J9I5

      Disengage the 2 guides and remove the rear side seatback assembly LH as shown in the illustration.

  7. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Remove the tonneau cover assembly.

  8. REMOVE REAR NO. 4 FLOOR BOARD


    1. A01JB13

      Disengage the guide and remove the rear No. 4 floor board.

  9. REMOVE DECK FLOOR BOX LH


    1. A01J9G6

      Remove the clip.

    2. Disengage the 2 guides and remove the deck floor box LH.

  10. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY


    1. A01J8Q1

      Disengage the 2 claws and 2 clips, and remove the rear No. 1 floor board sub-assembly.

  11. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY


    1. A01JCFP

      Disengage the claw and 2 clips, and remove the rear No. 2 floor board sub-assembly.

  12. REMOVE REAR NO. 1 FLOOR BOARD


    1. A01JBVX

      Remove the bolt.

    2. Disengage the 2 claws and 2 clips, and remove the rear No. 1 floor board.

  13. REMOVE DECK TRIM SERVICE HOLE COVER


    1. A01JD05

      Disengage the 2 claws and 3 guides, and remove the deck trim service hole cover.

  14. REMOVE REAR DECK TRIM COVER


    1. A01JCDX

      Disengage the 4 claws and 4 guides, and remove the rear deck trim cover.

  15. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY


    1. A01JAKN

      Remove the 2 bolts.

    2. Disengage each guide and remove the 2 luggage hold belt striker assemblies.

  16. REMOVE TONNEAU COVER HOLDER CAP


    1. A01JBMIE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the claw and remove the tonneau cover holder cap.

      Tech Tips

      Tape the screwdriver tip before use.

  17. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    1. Remove the screw.

    2. Disengage the 7 claws and 2 clips.

    3. Disconnect the connector and remove the deck trim side panel assembly LH.

      A01J8UZ

  18. REMOVE BACK DOOR LOCK ASSEMBLY


    1. A01JBJ6

      Disconnect the connector and disengage the 4 clamps.

    2. A01J983

      Remove the 3 bolts and back door lock assembly.