FRONT DOOR COURTESY SWITCH INSTALLATION


  1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. A01JBFF

      Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the bolt.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

    2. Connect the connector.

  2. INSTALL CENTER PILLAR LOWER GARNISH


    1. A01JAI1

      Engage the 2 claws and 2 clips to install the center pillar lower garnish LH.

  3. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP


    1. A01JBZWE01
      Text in Illustration
      *1 Alignment Mark (Red)

      Align the alignment mark (Red) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip LH.

      Note

      After installation, check that the corners fit correctly.

  4. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP


    1. A01JDC6E01
      Text in Illustration
      *1 Alignment Mark (Yellow)

      Align the alignment mark (Yellow) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip LH.

      Note

      After installation, check that the corners fit correctly.

  5. INSTALL REAR DOOR SCUFF PLATE


    1. A01JA7L

      Engage the 7 claws to install the rear door scuff plate LH.

  6. INSTALL FRONT DOOR SCUFF PLATE


    1. A01JB0N

      Engage the 10 claws to install the front door scuff plate LH.