PERSONAL LIGHT INSPECTION


  1. INSPECT MAP LIGHT ASSEMBLY (w/o Sliding Roof)


    1. Inspect the interior light operation.


      1. A01J9GIE39
        Text in Illustration
        *1

        Component without harness connected

        (Map Light Assembly)

        Connect a positive (+) lead from the battery to terminal 20 (+B1) and a negative (-) lead to terminal 11 (CTY).

      2. Turn the interior light door switch on.

      3. Turn the personal light switch off.

      4. Check that the interior lights come on.

        OK
        Interior lights come on.

        If the result is not as specified, replace the bulb or map light assembly.

    2. Inspect the personal light operation.


      1. Connect a positive (+) lead from the battery to terminal 20 (+B1) and a negative (-) lead to terminal 1 (GND1).

      2. Check that the personal lights come on.

        OK
        Condition Specified Condition
        Personal light switch LH on Personal light LH comes on
        Personal light switch LH off Personal light LH does not come on
        Personal light switch RH on Personal light RH comes on
        Personal light switch RH off Personal light RH does not come on

        If the result is not as specified, replace the bulb or map light assembly.

  2. INSPECT MAP LIGHT ASSEMBLY (w/ Sliding Roof)


    1. Inspect the interior light operation.


      1. A01JBXEE01
        Text in Illustration
        *1

        Component without harness connected

        (Map Light Assembly)

        Connect a positive (+) lead from the battery to terminal 24 (+B1) and a negative (-) lead to terminal 13 (CTY).

      2. Turn the interior light door switch on.

      3. Turn the personal light switch off.

      4. Check that the interior lights come on.

        OK
        Interior lights come on.

        If the result is not as specified, replace the bulb or map light assembly.

    2. Inspect the personal light operation.


      1. Connect a positive (+) lead from the battery to terminal 24 (+B1) and a negative (-) lead to terminal 9 (GND1).

      2. Check that the personal lights come on.

        OK
        Condition Specified Condition
        Personal light switch LH on Personal light LH comes on
        Personal light switch LH off Personal light LH does not come on
        Personal light switch RH on Personal light RH comes on
        Personal light switch RH off Personal light RH does not come on

        If the result is not as specified, replace the bulb or map light assembly.