PERSONAL LIGHT REMOVAL


  1. REMOVE ROOF TOP MOULDING


    1. A01JB5T

      Using moulding remover B, disengage the 3 claws and 2 clips, and remove the roof top moulding.

  2. REMOVE MAP LIGHT ASSEMBLY (w/o Sliding Roof)


    1. A01J98M

      Disengage the 4 clips and 2 guides as shown in the illustration.

    2. Disconnect the connector and remove the map light assembly.

  3. REMOVE MAP LIGHT ASSEMBLY (w/ Sliding Roof)


    1. A01J8OA

      Disengage the 4 clips and 2 guides as shown in the illustration.

    2. Disconnect the connector and remove the map light assembly.

  4. REMOVE MAP LIGHT BULB


    1. A01JA5D

      Turn the 2 map light bulbs and 2 map light sockets in the direction indicated by the arrows in the illustration and remove them as a unit.

    2. Remove the 2 map light bulbs from the 2 map light sockets.