LIGHTING SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Data List.

    5. Read the Data List according to the display on the intelligent tester.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ACC SW Power switch ACC signal/ON or OFF

      ON: Power switch on (ACC)

      OFF: Power switch off

      		 -
      IG SW Power switch IG signal/ON or OFF

      ON: Power switch on (IG)

      OFF: Power switch off

      		 -
      RR Door Courtesy SW Rear door courtesy light switch RH signal/ON or OFF

      ON: Rear door LH or RH open

      OFF: Rear door LH and RH closed

      		 -
      RL Door Courtesy SW Rear door courtesy light switch LH signal/ON or OFF

      ON: Rear door LH or RH open

      OFF: Rear door LH and RH closed

      		 -
      Back Door Courtesy SW Back door courtesy switch signal/ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      FR Door Lock Pos Front door unlock detection switch RH signal/ON or OFF

      ON: Front door RH unlocked

      OFF: Front door RH locked

      		 -
      FR Door Courtesy Front door courtesy light switch RH signal/ON or OFF

      ON: Front door RH open

      OFF: Front door RH closed

      		 -
      FL Door Lock Pos Front door unlock detection switch LH signal/ON or OFF

      ON: Front door LH unlocked

      OFF: Front door LH locked

      		 -
      FL Door Courtesy Front door courtesy light switch LH signal/ON or OFF

      ON: Front door LH open

      OFF: Front door LH closed

      		 -
      RR-Door Lock Pos SW Rear door unlock detection switch RH signal/ON or OFF

      ON: Rear door LH or RH unlocked

      OFF: Rear door LH and RH locked

      		 -
      RL-Door Lock Pos SW Rear door unlock detection switch LH signal/ON or OFF

      ON: Rear door LH or RH unlocked

      OFF: Rear door LH and RH locked

      		 -

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body or Smart Key / Active Test.

    5. Perform the Active Test according to the display on the intelligent tester.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Illuminated Entry System Interior lights ON/OFF Interior light door switch on and all doors closed
      Interior Panel Relay Interior panel relay ON/OFF Power switch is off and light control switch in tail position
      Step Light Operation Footwell lights ON/OFF Power switch off
      Smart Key
      Tester Display Test Part Control Range Diagnostic Note
      Power/Engine SW Light Power switch illumination ON/OFF All doors closed