ELECTRICAL KEY OSCILLATOR (for Rear Side) INSTALLATION


  1. INSTALL ELECTRICAL KEY OSCILLATOR (ELECTRICAL KEY ANTENNA)


    1. A01JCSS

      Install the electrical key oscillator (electrical key antenna) with the 2 nuts.

      Note

      Be careful when installing the electrical key oscillator (electrical key antenna). If the oscillator is dropped, replace it with a new one.

    2. Connect the connector.

  2. INSTALL REAR BUMPER ASSEMBLY


    1. A01JA19

      Engage the 4 claws and install the rear bumper assembly as shown in the illustration.

    2. A01JCL2

      Engage the 5 claws.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    3. A01JA49

      Install the screw.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. Engage the claw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. A01JBRJ

      Engage the 2 rear bumper upper stoppers and install the 2 screws.

    6. A01J94C

      Install the 9 clips.

    7. Install the nut.

  3. BUMPER POSITION SETTING (w/ Intelligent Parking Assist System)

    Click here