ELECTRICAL KEY OSCILLATOR (for Center Floor) REMOVAL


  1. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. A01JC67E01
      Text in Illustration
      *1 100 mm (3.94 in.) or less
      *2 Hook
      *3 Guide

      Disengage the 2 front hooks of the seat cushion from the vehicle body as shown in the illustration.

      Note

      Follow the instructions below carefully as the cushion frame deforms easily.


      1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

      2. Repeat the above procedure for the other hook.

    2. Disengage the 2 guides of the seat cushion from the seatback.

    3. Remove the rear seat cushion assembly.

  2. REMOVE ELECTRICAL KEY OSCILLATOR


    1. A01JA3Z

      Remove the 2 clips from the floor carpet.

    2. A01JCDO

      Remove the bolt.

    3. Disconnect the connector and remove the electrical key oscillator.

      Note

      Be careful when removing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.