INTRUSION SENSOR REMOVAL


  1. REMOVE ROOF TOP MOULDING


    1. A01JB5T

      Using moulding remover B, disengage the 3 claws and 2 clips, and remove the roof top moulding.

  2. REMOVE MAP LIGHT ASSEMBLY (w/o Sliding Roof)


    1. A01J98M

      Disengage the 4 clips and 2 guides as shown in the illustration.

    2. Disconnect the connector and remove the map light assembly.

  3. REMOVE MAP LIGHT ASSEMBLY (w/ Sliding Roof)


    1. A01J8OA

      Disengage the 4 clips and 2 guides as shown in the illustration.

    2. Disconnect the connector and remove the map light assembly.

  4. REMOVE THEFT WARNING RADAR SENSOR


    1. A01JD6K

      Disconnect the connector.

    2. Disengage the clamp.

    3. Remove the 3 screws and theft warning radar sensor.