SECURITY INDICATOR LIGHT ASSEMBLY INSPECTION


  1. INSPECT SECURITY INDICATOR LIGHT


    1. A01J97EE01
      Text in illustration
      *1

      Component with harness connected

      (Combination Meter Assembly (Security Indicator Light))

      Apply battery voltage from the wire harness back side between the specified terminals of the indicator, and check the lighting condition of the security indicator.

      Standard
      Measurement Condition Specified Condition

      Battery positive (+) → Terminals L27-22 (LP)

      Battery negative (-) → Terminals L27-30 (ES)

      		 Security indicator comes on

      If the result is not as specified, replace the No. 3 Meter Circuit Plate.