DATA LIST
Tech Tips
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body Electrical / Main Body / Data List.
According to the display on the intelligent tester, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| RR Door Courtesy SW | Rear right door courtesy switch/ON or OFF | ON: Rear right door RH or LH open OFF: Rear right door RH and LH closed |
- |
| RL Door Courtesy SW | Rear left door courtesy switch/ON or OFF | ON: Rear left door RH or LH open OFF: Rear left door RH and LH closed |
- |
| Back Door Courtesy SW | Back door courtesy switch/ON or OFF | ON: Back door open OFF: Back door closed |
- |
| FR Door Lock Pos | Front right door lock position switch/ON or OFF | ON: Front right door unlocked OFF: Front right door locked |
- |
| FR Door Courtesy | Front right door courtesy switch/ON or OFF | ON: Front right door open OFF: Front right door closed |
- |
| FL Door Lock Pos | Front left door lock position switch/ON or OFF | ON: Front left door unlocked OFF: Front left door locked |
- |
| FL Door Courtesy | Front left door courtesy switch/ON or OFF | ON: Front left door open OFF: Front left door closed |
- |
| Hood Courtesy SW | Engine hood courtesy signal/ON or OFF | ON: Engine hood open OFF: Engine hood closed |
- |
| RR-Door Lock Pos SW | Rear right door lock position switch/ON or OFF | ON: Rear right door RH or LH unlocked OFF: Rear right door RH and LH locked |
- |
| RL-Door Lock Pos SW | Rear left door lock position switch/ON or OFF | ON: Rear left door RH or LH unlocked OFF: Rear left door RH and LH locked |
- |
| Intrusion Sens OFF SW* | Intrusion sensor cancel switch/ON or OFF | ON: Intrusion sensor cancel switch on OFF: Intrusion sensor cancel switch off |
- |
| Intrusion Sensor* | Status of the intrusion sensor Detection/ON or OFF | ON: Intrusion sensor detected OFF: Intrusion sensor not detected |
- |
| Intrusion Sen Conn* | Intrusion sensor connecting/ON or OFF | ON: Intrusion sensor connected OFF: Intrusion sensor not connected |
- |
| Sealed Glas Brak Sen* | Glass breakage sensor connecting/With or Without | With: Glass breakage sensor connected Without: Glass breakage sensor not connected |
- |
*: w/ Intrusion Sensor
ACTIVE TEST
Tech Tips
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body Electrical / Main Body / Active Test.
According to the display on the intelligent tester, perform the Active Test.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Hazard | Hazard warning lights | ON / OFF | - |
| Security Indicator | Security indicator | ON / OFF | - |
| Security Horn2*1 | Theft warning siren | ON / OFF | - |
| Vehicle Horn | Vehicle horns | ON / OFF | - |
| Security Horn*2 | Security horn | ON / OFF | - |
| Power For Intrusion Sensor*1 | Intrusion sensor power supply | ON / OFF | - |
*1: w/ Intrusion Sensor
*2: w/o Intrusion Sensor