ENTRY AND START SYSTEM (for Entry Function) CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tech Tips

    The items in the table below can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current setting before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Customize Setting.

    5. Select the setting by referring to the table below.

      Entry & Start
      Tester Display Default Content Setting
      Park Wait Time 2.5 s Function that sets waiting time to permit opening door after door is locked with entry lock function 0.5 s, 1.5 s, 2.5 s or 5 s
      Ignition Available Area All Function that switches the entry hybrid vehicle control system start detection area Front or All
      Back Door Opening Operation* Long Function that opens the back door when the driver has the key and presses back door opener switch assembly (opener switch) Long, Twice or OFF

      *: w/ Entry System Back Door Open Function

      Warning
      Tester Display Default Content Setting
      Key Low Battery Warning ON Function that warns driver that the key battery is weak ON or OFF

  2. ELECTRICAL KEY CANCEL

    The electrical key cancel operation disables the following functions:


    • Entry Unlock/Lock

    • Entry Hybrid Vehicle Control System Start

    • Entry System Back Door Open Function*

      *: w/ Entry System Back Door Open Function

    • Electrical Key Lock-in Prevention

    • Warning


    1. The operation procedure is as follows:

      Precondition:

      Power switch off, driver door closed and unlocked.


      1. Push the unlock switch of the key once.

      2. Open the driver door within 5 seconds.

      3. Push the unlock switch of the key twice within 5 seconds.

      4. Close and open the driver door twice within 30 seconds.

        (Driver door: Close → Open → Close → Open)

      5. Push the unlock switch of the key twice within 5 seconds.

      6. Close and open the driver door within 30 seconds.

        (Driver door: Close → Open)

      7. Close the driver door within 5 seconds.

        When electrical key cancel is activated, the wireless door lock buzzer sounds twice.

        To return to the original condition, perform the procedure again. When the original condition is returned, the wireless door lock buzzer sounds once.