FRONT DOOR LOCK INSPECTION


  1. INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/o Double Locking System)


    1. A01JBH7E01
      Text in Illustration
      *1

      Component without harness connected

      (Front Door Lock Assembly LH)
      *2 Unlock
      *3 Lock

      Check the operation of the door lock motor.


      1. Apply battery voltage and check the operation of the door lock motor.

        OK
        Connection Result

        Battery positive (+) → Terminal 4 (L)

        Battery negative (-) → Terminal 1 (UL)

        		 Locks

        Battery positive (+) → Terminal 1 (UL)

        Battery negative (-) → Terminal 4 (L)

        		 Unlocks

        If the result is not as specified, replace the front door lock assembly LH.

    2. A01JBH7E02
      Text in Illustration
      *1

      Component without harness connected

      (Front Door Lock Assembly LH)
      *2 Unlock
      *3 Lock

      Check the operation of the door unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 (E) - 8 (LSSR) Locked 10 kΩ or higher
        7 (E) - 8 (LSSR) Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock assembly LH.

    3. A01J9WUE03
      Text in Illustration
      *1

      Component without harness connected

      (Front Door Lock Assembly LH)
      *2 Lock
      *3 off
      *4 Unlock

      Check the operation of the door key lock and unlock switch. (for LHD)


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        9 (L) - 8 (E) Locked Below 1 Ω
        9 (L) - 8 (E) off 10 kΩ or higher
        10 (UL) - 8 (E) Unlocked Below 1 Ω
        10 (UL) - 8 (E) off 10 kΩ or higher

        If the result is not as specified, replace the front door lock assembly RH.

  2. INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/ Double Locking System)


    1. A01J9BME01
      Text in Illustration
      *1

      Component without harness connected

      (Front Door Lock Assembly LH)
      *2 Unlock
      *3 Lock

      Check the operation of the door lock motor and double lock motor.


      1. Apply battery voltage and check the operation of the door lock motor and double lock motor.

        OK
        Connection Result

        Battery positive (+) → 4 (L)

        Battery negative (-) → 3 (UL)

        		 Locks

        Battery positive (+) → 3 (UL)

        Battery negative (-) → 4 (L)

        		 Unlocks

        Battery positive (+) → 2 (DL)

        Battery negative (-) → 1 (UNDL)

        		 Sets

        Battery positive (+) → 1 (UNDL)

        Battery negative (-) → 2 (DL)

        		 Unsets

        Tech Tips


        • Move the door lock motor to the lock position and set the double locking system. Check that the doors cannot be unlocked by operating the control cable.

        • Move the door lock motor to the lock position and unset the double locking system. Check that the doors can be unlocked by operating the control cable.

        If the result is not as specified, replace the front door lock assembly LH.

    2. A01J9BME02
      Text in Illustration
      *1

      Component without harness connected

      (Front Door Lock Assembly LH)
      *2 Unlock
      *3 Lock

      Check the operation of the door unlock detection switch and double lock position switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 (E) - 8 (LSSR) Locked 10 kΩ or higher
        7 (E) - 8 (LSSR) Unlocked Below 1 Ω
        5 (E) - 6 (DLSR) Unset 10 kΩ or higher
        5 (E) - 6 (DLSR) Set Below 1 Ω

        If the result is not as specified, replace the front door lock assembly LH.

  3. INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/o Double Locking System)


    1. A01J8JSE01
      Text in Illustration
      *1

      Component without harness connected

      (Front Door Lock Assembly RH)
      *2 Unlock
      *3 Lock

      Check the operation of the door lock motor.


      1. Apply battery voltage and check the operation of the door lock motor.

        OK
        Connection Result

        Battery positive (+) → Terminal 4 (L)

        Battery negative (-) → Terminal 1 (UL)

        		 Locks

        Battery positive (+) → Terminal 1 (UL)

        Battery negative (-) → Terminal 4 (L)

        		 Unlocks

        If the result is not as specified, replace the front door lock assembly RH.

    2. A01J8JSE02
      Text in Illustration
      *1

      Component without harness connected

      (Front Door Lock Assembly RH)
      *2 Unlock
      *3 Lock

      Check the operation of the door unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 (LSSR) - 8 (E) Locked 10 kΩ or higher
        7 (LSSR) - 8 (E) Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock assembly RH.

    3. A01JAGZE01
      Text in Illustration
      *1

      Component without harness connected

      (Front Door Lock Assembly RH)
      *2 Lock
      *3 off
      *4 Unlock

      Check the operation of the door key lock and unlock switch. (for RHD)


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        6 (L) - 8 (E) Locked Below 1 Ω
        6 (L) - 8 (E) off 10 kΩ or higher
        5 (UL) - 8 (E) Unlocked Below 1 Ω
        5 (UL) - 8 (E) off 10 kΩ or higher

        If the result is not as specified, replace the front door lock assembly RH.

  4. INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/ Double Locking System)


    1. A01J938E01
      Text in Illustration
      *1

      Component without harness connected

      (Front Door Lock Assembly RH)
      *2 Unlock
      *3 Lock

      Check the operation of the door lock motor and double lock motor.


      1. Apply battery voltage and check the operation of the door lock motor and double lock motor.

        OK
        Connection Result

        Battery positive (+) → 2 (L)

        Battery negative (-) → 1 (UL)

        		 Locks

        Battery positive (+) → 1 (UL)

        Battery negative (-) → 2 (L)

        		 Unlocks

        Battery positive (+) → 4 (DL)

        Battery negative (-) → 3 (UNDL)

        		 Sets

        Battery positive (+) → 3 (UNDL)

        Battery negative (-) → 4 (DL)

        		 Unsets

        Tech Tips


        • Move the door lock motor to the lock position and set the double locking system. Check that the doors cannot be unlocked by operating the control cable.

        • Move the door lock motor to the lock position and unset the double locking system. Check that the doors can be unlocked by operating the control cable.

        If the result is not as specified, replace the front door lock assembly RH.

    2. A01J938E02
      Text in Illustration
      *1

      Component without harness connected

      (Front Door Lock Assembly RH)
      *2 Unlock
      *3 Lock

      Check the operation of the door unlock detection switch and double lock position switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 (LSSR) - 8 (E) Locked 10 kΩ or higher
        7 (LSSR) - 8 (E) Unlocked Below 1 Ω
        9 (DLSR) - 10 (E) Unset 10 kΩ or higher
        9 (DLSR) - 10 (E) Set Below 1 Ω

        If the result is not as specified, replace the front door lock assembly RH.

    3. A01JAWXE01
      Text in Illustration
      *1

      Component without harness connected

      (Front Door Lock Assembly RH)
      *2 Lock
      *3 off
      *4 Unlock

      Check the operation of the door key lock and unlock switch. (for RHD)


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        6 (L) - 8 (E) Locked Below 1 Ω
        6 (L) - 8 (E) off 10 kΩ or higher
        5 (UL) - 8 (E) Unlocked Below 1 Ω
        5 (UL) - 8 (E) off 10 kΩ or higher

        If the result is not as specified, replace the front door lock assembly RH.