DOOR CONTROL TRANSMITTER INSTALLATION


  1. INSTALL TRANSMITTER BATTERY


    1. A01J9K1

      Install a new battery (lithium battery: CR1632) with the positive (+) side facing upward, as shown in the illustration.

      Note


      • Do not bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

    2. A01JASQ

      Install the transmitter housing cover by pressing down on it as shown in the illustration.

    3. A01J8Q4

      Insert the mechanical key into the transmitter.

    4. Press one of the transmitter switches and check that the LED illuminates.

      OK
      Transmitter LED illuminates when switch is pressed.