WIRELESS DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body or Illuminated Entry / Utility / Customize.

    5. Select the setting by referring to the table below.

      Wireless Door Lock Control System
      Display (item) Default Function Setting
      Wireless Control ON Function that turns wireless door lock function on or off ON or OFF
      Hazard Answer Back ON

      When the doors are locked by wireless operation, the hazard warning lights flash once.

      When the doors are unlocked by wireless operation, the hazard warning lights flash twice.

      		 ON or OFF
      Open Door Warning ON The buzzer sounds when lock is pressed when any of the doors are ajar. ON or OFF
      Panic Function*1 ON Function to operate theft deterrent system by continuously pressing panic switch on transmitter for 0.8 seconds ON or OFF
      Auto Lock Time 30 s Function that regulates the interval between unlocking and automatic relocking of doors 30 s, 60 s or 120 s
      Wireless Buzzer Resp*2 ON Wireless door lock buzzer response ON or OFF
      Wireless Buzzer Vol Level7 Wireless door lock buzzer volume Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0

      • *1: w/ Panic Function

      • *2: for Australia

      Illuminated Entry
      Display Default Content Setting
      Lighting Time 15 s Changes the lighting time after closing all doors. (It will quickly fade out in case of turning the power switch from off to on (ACC or IG).) 7.5 s, 15 s or 30 s

  2. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY

    Tech Tips

    The items in the table below can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current setting before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the multi-display (for Navigation Receiver Type)


      1. Turn the power switch on (IG).

      2. Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Auto Relock Timer 30 s Function that regulates the interval between unlocking and automatic relocking of doors 30 s, 60 s or 120 s Main body ECU (Multiplex network body ECU)
        Lock/Unlock Feedback-Lights On

        When the doors are locked by wireless operation, the hazard warning lights flash once.

        When the doors are unlocked by wireless operation, the hazard warning lights flash twice.

        		 On or Off Main body ECU (Multiplex network body ECU)
        Lock/Unlock Feedback-Tone 7 Wireless door lock buzzer volume Off, 1, 2, 3, 4, 5, 6 or 7 Main body ECU (Multiplex network body ECU)

      4. Enter the following menus: SETUP / Vehicle / Vehicle Customization / Light Settings

      5. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Interior Lights Off Timer 15 sec. Changes the lighting time after closing all doors. (It will quickly fade out in case of turning the power switch from off to on (ACC or IG).) Off, 7.5 sec., 15 sec. or 30 sec. Main body ECU (Multiplex network body ECU)

    2. Customizing with the multi-display (for Radio and Display Type)


      1. Turn the power switch on (IG).

      2. Enter the following menus: SETUP / Vehicle / Vehicle Settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Lock Feedback Volume 7 Wireless door lock buzzer volume Off, 1, 2, 3, 4, 5, 6 or 7 Main body ECU (Multiplex network body ECU)