DOOR CONTROL RELAY INSTALLATION


  1. INSTALL DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY


    1. A01J933

      Install the double lock door control relay assembly with the bolt.

    2. Connect the connector.

  2. INSTALL RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver)


    1. A01JBMF

      Install the radio tuner opening cover with bracket with the 4 bolts <B>.

  3. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Radio Receiver)


    1. A01JADX

      Engage the 4 claws to install the center instrument cluster finish panel sub-assembly.

  4. INSTALL RADIO RECEIVER WITH BRACKET (w/ Radio Receiver)


    1. Connect each connector.

    2. A01J9D0

      Engage the 4 claws as shown in the illustration.

    3. A01JD1M

      Install the radio receiver with bracket with the 4 bolts.

  5. INSTALL NAVIGATION RECEIVER WITH BRACKET (w/ Navigation System)


    1. A01JAM5

      Engage the 4 claws to temporarily install the navigation receiver assembly with bracket as shown in the illustration.

    2. A01JCMN

      Install the navigation receiver assembly with bracket with the 4 bolts.

  6. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. A01JD4M

      Connect the connector.

    2. Engage the 3 claws to install the upper instrument panel finish panel sub-assembly.

  7. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. Connect the connector.

    2. Engage the 14 claws to install the instrument cluster finish panel garnish.

      A01J8FE

  8. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01J96O

      Engage the 7 claws and 2 clips to install the lower center instrument cluster finish panel sub-assembly.

  9. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A01JCDA

      Connect each connector.

    2. Engage the 6 claws to install the integration control and panel assembly.

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Navigation System for HDD)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.