INTEGRATION RELAY REMOVAL


  1. PRECAUTION (w/ Navigation System for HDD)

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 1 RELAY BLOCK COVER


    1. A01JD3I

      Disengage the 3 claws and remove the No. 1 relay block cover.

  4. REMOVE NO. 1 INTEGRATION RELAY


    1. A01JBJ4

      Disengage the 2 claws and pull up the No. 1 integration relay as shown in the illustration.

    2. A01J8SZ

      Disconnect the 3 connectors and remove the No. 1 integration relay.