DATA LIST
Tech Tips
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. Thnon-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring disturbed. Reading the Data List information early in troubleshooting one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part faulty or not.
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Chass/ Intelligent Parking Assist / Data List.
According to the display on the tester, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| AVC-LAN Master Connect Status | AVC-LAN communication condition/OK or NG | OK: AVC-LAN communication condition normal NG: AVC-LAN communication condition abnormal |
- |
| AVC-LAN Master Reset Status | AVC-LAN communication condition/OK or NG | OK: AVC-LAN communication condition normal NG: AVC-LAN communication condition abnormal |
- |
| AVC-LAN Master Status | AVC-LAN communication condition/OK or NG | OK: AVC-LAN communication condition normal NG: AVC-LAN communication condition abnormal |
- |
| AVC-LAN Connect Status | AVC-LAN communication condition/OK or NG | OK: AVC-LAN communication condition normal NG: AVC-LAN communication condition abnormal |
- |
| AVC-LAN Sending Status | AVC-LAN communication condition/OK or NG | OK: AVC-LAN communication condition normal NG: AVC-LAN communication condition abnormal |
- |
| AVC-LAN Regist Complete Status | AVC-LAN communication condition/OK or NG | OK: AVC-LAN communication condition normal NG: AVC-LAN communication condition abnormal |
- |
| AVC-LAN Regist Request Status | AVC-LAN communication condition/OK or NG | OK: AVC-LAN communication condition normal NG: AVC-LAN communication condition abnormal |
- |
| ON/OFF Parameter Status | AVC-LAN communication condition/OK or NG | OK: AVC-LAN communication condition normal NG: AVC-LAN communication condition abnormal |
- |
| ROM/SUM Check | Parking assist ECU information/OK or NG | OK: Parking assist ECU normal NG: Parking assist ECU abnormal |
- |
| Mirror Check | Parking assist ECU information/OK or NG | OK: Parking assist ECU normal NG: Parking assist ECU abnormal |
- |
| High-Speed RAM Check | Parking assist ECU information/OK or NG | OK: Parking assist ECU normal NG: Parking assist ECU abnormal |
- |
| EEPROM Status (Initial read) | Parking assist ECU information/OK or NG | OK: Parking assist ECU normal NG: Parking assist ECU abnormal |
- |
| RAM Check | Parking assist ECU information/OK or NG | OK: Parking assist ECU normal NG: Parking assist ECU abnormal |
- |
| IG Voltage Low Status | IG voltage input to parking assist ECU/OK or NG | OK: IG voltage normal NG: IG voltage abnormal (too low) |
- |
| IG Voltage High Status | IG voltage input to parking assist ECU/OK or NG | OK: IG voltage normal NG: IG voltage abnormal (too high) |
- |
| ACC Voltage Low Status | ACC voltage input to parking assist ECU/OK or NG | OK: ACC voltage normal NG: ACC voltage abnormal (too low) |
- |
| ACC Voltage High Status | ACC voltage input to parking assist ECU/OK or NG | OK: ACC voltage normal NG: ACC voltage abnormal (too high) |
- |
| CPU Busy Status | Parking assist ECU information/OK or NG | OK: Parking assist ECU normal NG: Parking assist ECU abnormal |
- |
| CPU Communication Status | Parking assist ECU information/OK or NG | OK: Parking assist ECU normal NG: Parking assist ECU abnormal |
- |
| Integer Arithmetic Status | Parking assist ECU information/OK or NG | OK: Parking assist ECU normal NG: Parking assist ECU abnormal |
- |
| FPU Calculation Status | Parking assist ECU information/OK or NG | OK: Parking assist ECU normal NG: Parking assist ECU abnormal |
- |
| AISIC Output Status | Output condition of camera display signal/OK or NG | OK: Output condition of camera display signal normal NG: Output condition of camera display signal abnormal |
- |
| EPS Status | EPS (Power Steering System) status/OK or NG | OK: EPS available NG: EPS not available |
- |
| Wheel Speed Sensor (4wheel) | Effectivity of speed signal from speed signal sensor/OK or NG | OK: Speed signal effective NG: Speed signal not effective |
- |
| Height Sensor Volt Status (L) | Power supply for rear height control sensor sub-assembly RH (Low)/OK or NG | OK: Power supply for rear height control sensor sub-assembly RH normal NG: Power supply for rear height control sensor sub-assembly RH abnormal |
- |
| Height Sensor Volt Status (H) | Power supply for rear height control sensor sub-assembly RH (High)/OK or NG | OK: Power supply for rear height control sensor sub-assembly RH normal NG: Power supply for rear height control sensor sub-assembly RH abnormal |
- |
| Height Sensor Status | Vehicle height signal from rear height control sensor sub-assembly RH/OK or NG | OK: Signal from rear height control sensor sub-assembly RH normal NG: Signal from rear height control sensor sub-assembly RH abnormal |
- |
| Height Sensor Status (Fixing) | Vehicle height signal from rear height control sensor sub-assembly RH (Fixing)/OK or NG | OK: Rear height control sensor sub-assembly RH normal NG: Rear height control sensor sub-assembly RH fixing |
- |
| FLS Sensor Status (Left) | No. 1 ultrasonic sensor (front left sensor) condition/OK or NG | OK: No. 1 ultrasonic sensor (front left sensor) normal NG: No. 1 ultrasonic sensor (front left sensor) abnormal |
- |
| FLS Sensor Status (Right) | No. 1 ultrasonic sensor (front right sensor) condition/OK or NG | OK: No. 1 ultrasonic sensor (front right sensor) normal NG: No. 1 ultrasonic sensor (front right sensor) abnormal |
- |
| Temp Sensor Activate Status | Ambient temperature sensor status/valid or invalid | OK: Ambient temperature sensor available NG: Ambient temperature sensor not available |
- |
| Temp Sensor Status | Ambient temperature sensor status/OK or NG | OK: Ambient temperature sensor available NG: Ambient temperature sensor not available |
- |
| A/C Communication Status | Communication condition to air conditioning amplifier assembly/OK or NG | OK: Communication condition available NG: Communication condition not available |
- |
| Number of DTC | Number of stored trouble codes/min.: 0, max.: 255 | Number of DTCs will be displayed | - |