YAW RATE AND ACCELERATION SENSOR INSTALLATION


  1. INSTALL YAW RATE AND ACCELERATION SENSOR


    1. A01JCSV

      Connect the yaw rate and acceleration sensor connector.

      Note

      Make sure that the yaw rate and acceleration sensor connector is connected securely.

    2. Install the yaw rate and acceleration sensor with the 2 bolts.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Note


      • Do not damage the yaw rate and acceleration sensor.

      • Make sure that the yaw rate and acceleration sensor is installed securely.

      • Do not use dropped or damaged parts.

      • Keep the contact surfaces of the yaw rate and acceleration sensor and the body free of foreign matter.

      • Make sure that the sensor is facing the correct direction.

  2. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL ASSEMBLY


    1. Temporarily install the console box assembly.

    2. A01JA7O

      Engage the 9 claws as shown in the illustration.

    3. A01J9NZ

      Install the to install the upper instrument panel finish panel assembly with the 2 bolts <A>.

    4. Engage the clamp.

  3. INSTALL SHIFT LOCK CONTROL UNIT ASSEMBLY


    1. A01JBN7

      Install the shift lock control unit assembly with the 3 nuts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

    2. Connect the connector to the shift lock control unit assembly.

  4. INSTALL AIR CONDITIONING CONTROL ASSEMBLY


    1. Connect the connector.

      Note

      Since the connectors for the air conditioning control assembly and the integration control and panel sub-assembly are the same shape, take care to connect each connector to the correct component.

    2. A01JAF5

      Engage the 4 claws to install the air conditioning control assembly.

  5. INSTALL CONSOLE BOX ASSEMBLY


    1. Connect each connector.

    2. A01JBTU

      Engage the 4 guides and 2 claws as shown in the illustration.

    3. Install the console box assembly with the bolt <B> and 2 clips.

  6. INSTALL BOX BOTTOM MAT


    1. Engage the fastener to install the box bottom mat.

  7. INSTALL FRONT NO. 2 CONSOLE BOX INSERT


    1. A01JAEDE01

      Engage the guide and 4 claws to install the front No. 2 console box insert as shown in the illustration.

  8. INSTALL FRONT NO. 1 CONSOLE BOX INSERT


    1. A01J9VEE01

      Engage the guide and 4 claws to install the front No. 1 console box insert as shown in the illustration.

  9. INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET


    1. Install the No. 2 console box mounting bracket with the 6 bolts <B>.

  10. INSTALL ELECTRICAL KEY OSCILLATOR


    1. A01J8YH

      Engage the clamp and install the electrical key oscillator.

      Note

      Be careful when installing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.

    2. Connect the connector.

  11. INSTALL REAR CONSOLE BOX ASSEMBLY

    Click here

  12. INSTALL GLOVE COMPARTMENT DOOR


    1. Open the glove compartment door assembly.

    2. A01J9YD

      Insert the glove compartment door as shown in the illustration.

    3. Engage the 7 claws to install the glove compartment door.

  13. INSTALL NO. 2 INSTRUMENT PANEL REGISTER


    1. A01JA22

      Engage the 3 claws and clip to install the No. 2 instrument panel register.

  14. INSTALL NO. 1 SIDE DEFROSTER NOZZLE


    1. A01JAQW

      Engage the 3 claws to install the No. 1 side defroster nozzle.

  15. INSTALL NAVIGATION RECEIVER WITH BRACKET (for Navigation Receiver Type)


    1. A01JAM5

      Engage the 4 claws and temporarily install the navigation receiver with bracket as shown in the illustration.

    2. Install the navigation receiver with bracket with the 4 bolts.

  16. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)


    1. Connect each connector.

    2. Engage the 4 claws.

    3. Install the radio and display receiver assembly with bracket with the 4 bolts.

  17. INSTALL RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver)


    1. A01JBMF

      Install the radio tuner opening cover with bracket with the 4 bolts <B>.

  18. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Radio Receiver)


    1. A01JADX

      Engage the 4 claws to install the center instrument cluster finish panel sub-assembly.

  19. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. A01JD4M

      Connect the connector.

    2. Engage the 3 claws to install the upper instrument panel finish panel sub-assembly.

  20. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. Connect the connector.

    2. Engage the 14 claws to install the instrument cluster finish panel garnish.

  21. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01J96O

      Engage the 7 claws and 2 clips to install the lower center instrument cluster finish panel sub-assembly.

  22. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A01JCDA

      Connect each connector.

    2. Engage the 6 claws to install the integration control and panel assembly.

  23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  24. INSTALL REAR NO. 3 FLOOR BOARD


    1. A01JC33

      Engage the 2 guides to install the rear No. 3 floor board.

  25. INSTALL REAR DECK FLOOR BOX


    1. Install the rear deck floor box.

  26. INSTALL REAR NO. 2 FLOOR BOARD


    1. A01JCWRE01

      Engage the 3 guides <A>.

    2. Engage the 2 guides <B> and install the rear No. 2 floor board as shown in the illustration.

  27. PERFORM YAW RATE AND ACCELERATION SENSOR ZERO POINT CALIBRATION

    Click here