ELECTRONICALLY CONTROLLED BRAKE SYSTEM, Diagnostic DTC:C1300

DTC Code DTC Name
C1300 Skid Control ECU Malfunction

DESCRIPTION

The skid control ECU outputs this DTC if malfunctions are found in the circuit inside the ECU by self diagnosis.

DTC Code INF Code DTC Detection Condition Trouble Area
C1300 - Skid control ECU internal malfunction. Brake booster with master cylinder (Skid control ECU)

INSPECTION PROCEDURE

PROCEDURE


  1. REPLACE BRAKE BOOSTER WITH MASTER CYLINDER


    1. Replace the brake booster with master cylinder (skid control ECU) Click here for LHD or Click here for RHD).

    2. Perform initialization, calibration of the linear solenoid valve and emergency brake signal learning Click here.

    3. Perform the zero point calibration of the yaw rate and acceleration sensor Click here.

    4. Perform the sensor check in the Test Mode procedure Click here.


    NEXT

    END