FRONT STABILIZER BAR REMOVAL


  1. REMOVE FRONT WHEELS

  2. REMOVE NO. 1 ENGINE UNDER COVER

  3. REMOVE NO. 2 ENGINE UNDER COVER

  4. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    1. A01JCDIE01
      Text in Illustration
      *1 Upper Side
      *2 Lower Side

      Remove the 2 nuts and front stabilizer link assembly LH.

      Tech Tips

      If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.

  5. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  6. SEPARATE FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH


    1. A01JA8N

      Remove the bolt and 2 nuts, and separate the front No. 1 lower suspension arm sub-assembly from the front lower ball joint.

  7. REMOVE FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH


    1. A01JD4W

      Remove the 2 bolts, nut, and front No. 1 lower suspension arm sub-assembly LH from the front suspension member.

      Note

      Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

  8. REMOVE FRONT SUSPENSION MEMBER FRONT BRACE LH


    1. A01J9SE

      Remove the 4 bolts and front suspension member front brace LH.

  9. REMOVE FRONT SUSPENSION MEMBER FRONT BRACE RH

    Tech Tips

    Perform the same procedure as for the LH side.

  10. REMOVE FRONT STABILIZER BAR


    1. A01J91R

      Remove the front stabilizer bar with front stabilizer bar bushing from the front suspension crossmember sub-assembly.

  11. REMOVE FRONT STABILIZER BAR BUSHING LH


    1. A01JC6X

      Remove the front stabilizer bar bushing LH from the front stabilizer bar.

  12. REMOVE FRONT STABILIZER BAR BUSHING RH

    Tech Tips

    Perform the same procedure as for the LH side.