FRONT LOWER BALL JOINT INSTALLATION

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The procedure listed below is for the LH side.


  1. INSTALL FRONT LOWER BALL JOINT ASSEMBLY


    1. Secure the front axle assembly in a vise.

      Note

      When using a vise, do not overtighten it.

    2. A01JAAK

      Install the front lower ball joint assembly to the front axle assembly with the nut.

      Torque:
      71 N*m  { 724 kgf*cm, 52 ft.*lbf }

    3. Install a new clip.

      Note

      Further tighten the nut up to 60° if the holes for the cotter pin are not aligned.

  2. INSTALL FRONT AXLE ASSEMBLY

    Tech Tips

    Refer to the procedure from Install Front Axle Assembly Click here.