FRONT LOWER SUSPENSION ARM INSTALLATION


  1. TEMPORARILY TIGHTEN FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY RH

    Tech Tips

    Refer to the procedure from Temporarily Tighten Front No. 1 Lower Suspension Arm Sub-assembly RH Click here.

  2. TEMPORARILY TIGHTEN FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH


    1. A01JD4W

      Temporarily install the front No. 1 lower suspension arm LH to the front suspension crossmember with the 2 bolts and nut.

      Note

      Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

  3. CONNECT FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH


    1. A01JA8N

      Install the front No. 1 lower suspension arm sub-assembly to the front lower ball joint with the bolt and 2 nuts.

      Torque:
      89 N*m  { 908 kgf*cm, 66 ft.*lbf }

  4. INSTALL FRONT WHEELS

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

  5. STABILIZE SUSPENSION


    1. Lower the vehicle.

    2. Press down on the vehicle several times to stabilize the suspension.

  6. FULLY TIGHTEN FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH


    1. A01JD5WE02

      Fully tighten the bolt A and B.

      Torque:
      Bolt A
      233 N*m  { 2376 kgf*cm, 172 ft.*lbf }
      Bolt B
      214 N*m  { 2182 kgf*cm, 158 ft.*lbf }

      Note

      Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

  7. INSTALL NO. 1 ENGINE UNDER COVER

  8. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

    Tech Tips

    Inspect and adjust the front wheel alignment Click here.