FRONT DRIVE SHAFT ASSEMBLY INSPECTION


  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY


    1. A01J8GH

      Check that there is no excessive play in the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial directions of the inboard joint.

    4. A01J9U2E01

      Check the boots for damage.

      Note

      Keep the drive shaft assembly level during inspection.

      Tech Tips

      For dimensions (A), refer to the following values.

      Dimension (A)
      LH Side RH Side
      556.2 mm (1.82 ft.) 905.2 mm (2.96 ft.)