DRIVING SUPPORT ECU INSTALLATION


  1. INSTALL DRIVING SUPPORT ECU (for LHD)


    1. A01JC0P

      Install the driving support ECU with the nut.

      Note

      Do not install the driving support ECU if it has been damaged or impacted in any way.

    2. A01JAV4

      Connect the connector.

  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)


    1. A01JAP5E01
      Text in Illustration
      *a Opened Approximately 55°
      *b Closed

      With the glove compartment door assembly opened approximately 55° from its closed position, engage the 2 hinges horizontally.

      Note

      Engaging the hinges from the top will deform the hinges. Be sure to install the glove compartment door assembly horizontally.

    2. A01JD6GE01
      Text in Illustration
      *1 Glove Compartment Door Stopper Sub-assembly
      *2 Stopper

      Slightly bend the stoppers (A) and (B) in the directions indicated by the arrows in the illustration and engage the stoppers to install the glove compartment door assembly.

    3. Engage the claw and connect the glove compartment door stopper sub-assembly.

  3. INSTALL DRIVING SUPPORT ECU (for RHD)


    1. A01J8U3

      Install the driving support ECU with the nut.

    2. A01JAR3

      Connect the connector.

  4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for RHD)

    Tech Tips

    Use the same procedure described for the LH side Click here.

  5. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for RHD)

    Tech Tips

    Use the same procedure described for the LH side Click here.

  6. INSTALL FRONT DOOR SCUFF PLATE RH (for RHD)

    Tech Tips

    Use the same procedure described for the LH side Click here.