WATER PUMP REMOVAL


  1. REMOVE FRONT SPOILER COVER (w/ Front Spoiler)

  2. REMOVE ENGINE UNDER COVER

  3. REMOVE INLET AIR CLEANER ASSEMBLY


    1. A01JBG6

      Separate the water by-pass hose from the inlet air cleaner assembly.

    2. Separate the wire harness clamp from the inlet air cleaner assembly.

    3. Remove the 3 bolts and inlet air cleaner assembly.

  4. DRAIN COOLANT (for Engine)

    Note

    Do not remove the reservoir tank cap, cylinder block drain cock plugs and radiator drain cock plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


    1. Loosen the radiator drain cock plug and drain the coolant.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the local regulations.

    2. Loosen the cylinder block drain cock plug.

      Tech Tips

      The plug is on the back of the generator on the exhaust manifold side.

      A01JB2ZE01
      Text in Illustration
      *1 Reservoir Tank Cap *2 Cylinder Block Drain Cock Plug
      *3 Radiator Drain Cock Plug *4 Air Release Valve

  5. REMOVE ENGINE WATER PUMP ASSEMBLY


    1. Disconnect the connector from the engine water pump assembly.

    2. A01JA8E

      Remove the 5 bolts and engine water pump assembly from the timing chain cover.

    3. A01JB9I

      Remove the gasket from the engine water pump assembly.