PCV VALVE REMOVAL


  1. REMOVE NO. 2 CYLINDER HEAD COVER


    1. A01JAJ9

      Remove the 3 clips and No. 2 cylinder head cover.

      Note


      • Attempting to disengage both front and rear clips at the same time may cause the cover to break.

      • Pull the cover straight up to remove. Attempting to pull the cover forward may cause it to break.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the cover to break.

  2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    1. A01JAMH

      Disconnect the connector.

    2. A01J9I2

      Loosen the hose clamp and disconnect the air cleaner hose assembly.

    3. Remove the 2 clamps and air cleaner cap sub-assembly.

  3. REMOVE INLET AIR CLEANER ASSEMBLY


    1. A01JBRT

      Remove the 2 bolts and inlet air cleaner assembly.

  4. REMOVE AIR CLEANER CASE


    1. Remove the air cleaner filter element sub-assembly.

    2. A01JCW8

      Separate the hose from the 3 clamps.

    3. Remove the 3 bolts and air cleaner case.

  5. REMOVE NO. 1 ENGINE UNDER COVER

  6. REMOVE VENTILATION VALVE SUB-ASSEMBLY


    1. A01J91E

      Remove the ventilation hose from the ventilation valve sub-assembly.

    2. A01JD1NE01
      Text in Illustration
      *1 Ball Joint Lock Nut Wrench (22 mm)

      Using a ball joint lock nut wrench (22 mm), remove the ventilation valve sub-assembly.