FUEL SENDER GAUGE ASSEMBLY INSTALLATION


  1. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A01J9N1

      Install the fuel sender gauge assembly by sliding it downward.

    2. A01J8HZ

      Connect the connector of the fuel sender gauge assembly.

    3. A01J8JN

      Install the 2 harness protectors.

      Note

      Do not damage the wire harness.

    4. A01J97D

      Connect the 3 harness clamps.

  2. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE


    1. Install the fuel suction tube assembly with pump and gauge Click here.