FUEL PRESSURE REGULATOR INSTALLATION


  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY


    1. A01JAPAE11
      Text in Illustration
      *1 O-ring

      Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.

    2. A01J8ZHE02

      Install the fuel pressure regulator assembly.

  2. INSTALL FUEL PUMP


    1. A01J9Q4E05
      Text in Illustration
      *1 O-ring
      *2 Spacer

      Apply gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.

    2. A01JBXT

      Connect the fuel pump harness connector.

    3. A01J8HA

      Engage the 5 claws of the fuel pump.

      Note


      • Make sure that the O-ring is not cut or pinched during the installation.

      • Engage the claws securely.

      • Do not remove the fuel filter.

    4. A01JBOU

      Engage the 2 claws of the No. 1 fuel suction support.

    5. A01J9TQ

      Engage the 2 claws of the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.

    6. A01J8F0

      Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the hose.

      Note

      Do not apply excessive force to the fuel tube or the suction support.

    7. A01JCLF

      Connect the connector of the fuel pump harness.

  3. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A01JCYTE02

      Install the fuel sender gauge assembly by sliding it downward.

    2. A01J8HZ

      Connect the connector of the fuel sender gauge assembly.

    3. A01J8JN

      Install the 2 harness protectors.

      Note

      Do not damage the wire harness.

    4. A01JBQO

      Connect the 3 harness clamps.

  4. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE


    1. Install the fuel suction tube assembly with pump and gauge Click here.