BATTERY COOLING DUCT (w/ Filter) INSTALLATION


  1. INSTALL NO. 1 HYBRID BATTERY INTAKE FILTER


    1. A01JCBRE02

      Engage the 3 claws in the order shown in the illustration to install the No. 1 hybrid battery intake filter to the No. 1 hybrid battery intake duct.

  2. INSTALL REAR SIDE SEAT BACK ASSEMBLY RH


    1. A01J9RZ

      Engage the 2 guides as shown in the illustration.

    2. A01JCTM

      Install the rear side seatback assembly RH with the bolt.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  3. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side Click here.

  4. INSTALL REAR SEAT CUSHION ASSEMBLY


    1. A01JCUFE01
      Text in Illustration
      *1 100 mm (3.94 in.) or less
      *2 Guide
      *3 Hook

      Engage the 2 guides of the seat cushion to the seatback.

    2. Engage the 2 front hooks of the seat cushion to the vehicle body.

      Note

      When installing the seat cushion, make sure that the seat belt buckle is not under the seat cushion.

      Tech Tips

      Confirm that the seat cushion is firmly installed.