BATTERY COOLING DUCT (w/ Filter) REMOVAL


  1. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. A01JC67E01
      Text in Illustration
      *1 100 mm (3.94 in.) or less
      *2 Hook
      *3 Guide

      Disengage the 2 front hooks of the seat cushion from the vehicle body as shown in the illustration.

      Note

      Follow the instructions below carefully as the cushion frame deforms easily.


      1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

      2. Repeat the above procedure for the other hook.

    2. Disengage the 2 guides of the seat cushion from the seatback.

    3. Remove the rear seat cushion assembly.

  2. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side Click here.

  3. REMOVE REAR SIDE SEAT BACK ASSEMBLY RH


    1. A01JCTM

      Remove the bolt.

    2. A01JB67

      Disengage the 2 guides and remove the rear side seatback assembly RH as shown in the illustration.

  4. REMOVE NO. 1 HYBRID BATTERY INTAKE FILTER


    1. A01JCBRE01

      Disengage the 3 claws in the order shown in the illustration and remove the No. 1 hybrid battery intake filter from the No. 1 hybrid battery intake duct.