BATTERY COOLING DUCT (w/ Filter) INSPECTION

INSPECT NO. 1 HYBRID BATTERY INTAKE FILTER

1. Inspect No. 1 hybrid battery intake filter.

   Standard
   No clogs or damage.

   Note

   
   

   • If the No. 1 hybrid battery intake filter is damaged, replace it with a new one.

   • If the No. 1 hybrid battery intake filter is damaged, check for foreign matter in the battery cooling blower assembly. Clean or replace the battery cooling blower assembly if necessary.

2. Clean the No. 1 hybrid battery intake filter.

   Note

   
   

   • Clean the No. 1 hybrid battery intake filter with an air blow gun. Do not use water or any other liquid.

   • Do not use a wire brush or any other type of brush as it may damage the No. 1 hybrid battery intake filter.

   • To prevent removed foreign matter from entering the HV battery, make sure to remove the No. 1 hybrid battery intake filter when cleaning it.

   
   

   1. Using an air blow gun, clean the No. 1 hybrid battery intake filter.