HYBRID BATTERY SYSTEM, Diagnostic DTC:P3011-123, P3012-123, P3013-123, P3014-123, P3015-123, P3016-123, P3017-123, P3018-123, P3019-123, P3020-123, P3021-123, P3022-123, P3023-123, P3024-123

DTC Code DTC Name
P3011-123 Battery Block 1 Becomes Weak
P3012-123 Battery Block 2 Becomes Weak
P3013-123 Battery Block 3 Becomes Weak
P3014-123 Battery Block 4 Becomes Weak
P3015-123 Battery Block 5 Becomes Weak
P3016-123 Battery Block 6 Becomes Weak
P3017-123 Battery Block 7 Becomes Weak
P3018-123 Battery Block 8 Becomes Weak
P3019-123 Battery Block 9 Becomes Weak
P3020-123 Battery Block 10 Becomes Weak
P3021-123 Battery Block 11 Becomes Weak
P3022-123 Battery Block 12 Becomes Weak
P3023-123 Battery Block 13 Becomes Weak
P3024-123 Battery Block 14 Becomes Weak

DESCRIPTION


DTC No. DTC Detection Condition Trouble Area

P3011-123

P3012-123

P3013-123

P3014-123

 Presence of a malfunctioning block is determined based on each battery block voltage (1 trip detection).

  • HV battery assembly

  • Battery smart unit
P3015-123 Presence of a malfunctioning block is determined based on each battery block voltage (1 trip detection).

  • HV battery assembly

  • Battery smart unit

  • Service plug grip

P3016-123

P3017-123

P3018-123

P3019-123

P3020-123

P3021-123

P3022-123

P3023-123

P3024-123

 Presence of a malfunctioning block is determined based on each battery block voltage (1 trip detection).

  • HV battery assembly

  • Battery smart unit

Tech Tips

P3011-123 to P3024-123 will not be set unless the vehicle is driven for approximately 10 minutes after clearing the DTCs.

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK DTC OUTPUT (DTC P0AFC-123 IS OUTPUT)


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

    4. Read output DTCs Click here.

      Result
      Result Proceed to
      P0AFC-123 is not output. A
      P0AFC-123 is also output. B

    5. Disconnect the intelligent tester from the DLC3.


    B

    GO TO DTC CHART

    A

  2. READ VALUE USING INTELLIGENT TESTER (VB1 - VB14)


    1. Ensure the safety of the areas in front and at the back of the vehicle.

    2. Apply the parking brake and secure the wheels using chocks.

    3. Connect the intelligent tester to the DLC3.

    4. Turn the power switch on (READY).

    5. Fully warm up the engine and turn the air conditioning off.

    6. Enter the following menus: Powertrain / Hybrid Control / Data List / Battery block Vol -V01 to V14.

    7. Firmly depress the brake pedal with your left foot.

    8. Move the select lever to D.

    9. Record each battery block voltage from the data list (Battery block Vol -V01 to V14) while fully depressing the accelerator pedal.

    10. Compare the battery block voltages (Battery block Vol - V01 to V14) between the even and odd number groups in each combination shown in the table below.

      Table 1
      Circuit A Battery Block Circuit B Battery Block Condition
      Battery Block Vol-V01 (VB1) Battery Block Vol-V02 (VB2) "Battery Block Vol - V01" - "Battery Block Vol - V02" = 0.3 V or more
      Battery Block Vol-V04 (VB4) Battery Block Vol-V03 (VB3) "Battery Block Vol - V04" - "Battery Block Vol - V03" = 0.3 V or more
      Battery Block Vol-V05 (VB5) Battery Block Vol-V06 (VB6) "Battery Block Vol - V05" - "Battery Block Vol - V06" = 0.3 V or more
      Battery Block Vol-V08 (VB8) Battery Block Vol-V07 (VB7) "Battery Block Vol - V08" - "Battery Block Vol - V07" = 0.3 V or more
      Battery Block Vol-V09 (VB9) Battery Block Vol-V10 (VB10) "Battery Block Vol - V09" - "Battery Block Vol - V10" = 0.3 V or more
      Battery Block Vol-V12 (VB12) Battery Block Vol-V11 (VB11) "Battery Block Vol - V12" - "Battery Block Vol - V11" = 0.3 V or more
      Battery Block Vol-V13 (VB13) Battery Block Vol-V14 (VB14) "Battery Block Vol - V13" - "Battery Block Vol - V14" = 0.3 V or more
      Table 2
      Circuit A Battery Block Circuit B Battery Block Condition
      Battery Block Vol-V01 (VB1) Battery Block Vol-V02 (VB2) "Battery Block Vol - V02" - "Battery Block Vol - V01" = 0.3 V or more
      Battery Block Vol-V04 (VB4) Battery Block Vol-V03 (VB3) "Battery Block Vol - V03" - "Battery Block Vol - V04" = 0.3 V or more
      Battery Block Vol-V05 (VB5) Battery Block Vol-V06 (VB6) "Battery Block Vol - V06" - "Battery Block Vol - V05" = 0.3 V or more
      Battery Block Vol-V08 (VB8) Battery Block Vol-V07 (VB7) "Battery Block Vol - V07" - "Battery Block Vol - V08" = 0.3 V or more
      Battery Block Vol-V09 (VB9) Battery Block Vol-V10 (VB10) "Battery Block Vol - V10" - "Battery Block Vol - V09" = 0.3 V or more
      Battery Block Vol-V12 (VB12) Battery Block Vol-V11 (VB11) "Battery Block Vol - V11" - "Battery Block Vol - V12" = 0.3 V or more
      Battery Block Vol-V13 (VB13) Battery Block Vol-V14 (VB14) "Battery Block Vol - V14" - "Battery Block Vol - V13" = 0.3 V or more
      A01JADAE02

      Tech Tips

      When an internal malfunction occurs in the battery smart unit, this symptom (difference in voltage of 0.3 V or more for all 7 pairs of blocks) will occur.

      Result
      Result Proceed to
      All conditions in table 1 are met. A
      All conditions in table 2 are met.
      Other than above. B

    11. Turn the power switch off.

    12. Disconnect the intelligent tester from the DLC3.


    B

    CHECK DTC OUTPUT Click here

    A

    REPLACE BATTERY SMART UNIT Click here

  3. CHECK DTC OUTPUT


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Hybrid Control / DTC.

    4. Check if DTCs are output.

      Result
      Result Proceed to
      DTC P3015-123 is output. A
      DTC P3015-123 is not output. B

    5. Turn the power switch off.


    B

    REPLACE HV BATTERY ASSEMBLY Click here

    A

    REPLACE SERVICE PLUG GRIP AND HV BATTERY ASSEMBLY Click here