IGNITION COIL AND SPARK PLUG REMOVAL


  1. REMOVE NO. 2 CYLINDER HEAD COVER


    1. A01JAJ9

      Remove the 3 clips and No. 2 cylinder head cover.

      Note


      • Attempting to disengage both front and rear clips at the same time may cause the cover to break.

      • Pull the cover straight up to remove. Attempting to pull the cover forward may cause it to break.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the cover to break.

  2. REMOVE IGNITION COIL ASSEMBLY


    1. A01JCLW

      Disconnect the 4 ignition coil connectors.

    2. Remove the 4 bolts and 4 ignition coils.

      Note

      When removing each ignition coil, do not damage the plug cap on the engine head cover opening or the upper edge of the spark plug tube.

  3. REMOVE SPARK PLUG


    1. A01JA1V

      Using a 14 mm spark plug wrench, remove the 4 spark plugs.