SFI SYSTEM (w/ EGR System) HOW TO PROCEED WITH TROUBLESHOOTING
Tech Tips
*: Use the intelligent tester.
-
VEHICLE BROUGHT TO WORKSHOP
NEXT 
-
CUSTOMER PROBLEM ANALYSIS
NEXT
-
CONNECT INTELLIGENT TESTER TO DLC3
Tech Tips
If the display indicates a communication fault in the intelligent tester, inspect the DLC3.
NEXT
-
CHECK DTC AND FREEZE FRAME DATA*
Tech Tips
Record or print DTCs and freeze frame data, if necessary.
NEXT
-
CLEAR DTC AND FREEZE FRAME DATA*
NEXT
-
CONDUCT VISUAL INSPECTION
NEXT
-
SELECT CHECK MODE DIAGNOSIS*
NEXT
-
CONFIRM PROBLEM SYMPTOMS
Tech Tips
If the engine does not start, first perform the "Check DTC" procedures and "Conduct Basic Inspection" procedures below.
Result Proceed to Malfunction does not occur A Malfunction occurs B
B 
GO TO STEP 10
A
-
SIMULATE SYMPTOMS
Tech Tips
Refer to Problem Symptoms Table Click here.
NEXT
-
CHECK DTC*
Tech Tips
Refer to DTC Check / Clear Click here.
Result Proceed to Trouble code A No code B
B
GO TO STEP 12
A
-
REFER TO DTC CHART
Tech Tips
Refer to Diagnostic Trouble Code Chart Click here.
NEXT
-
CONDUCT BASIC INSPECTION
Tech Tips
Refer to Basic Inspection Click here.
Result Proceed to Malfunctioning parts not confirmed A Malfunctioning parts confirmed B
B
GO TO STEP 17
A
-
REFER TO PROBLEM SYMPTOMS TABLE
Tech Tips
Refer to Problem Symptoms Table Click here.
Result Proceed to Malfunctioning circuit confirmed A Malfunctioning parts confirmed B
B
GO TO STEP 17
A
-
CHECK ECM POWER SOURCE CIRCUIT
Tech Tips
Refer to ECM Power Source Circuit Click here.
NEXT
-
CONDUCT CIRCUIT INSPECTION
Result Proceed to Malfunction not confirmed A Malfunction confirmed B
B
GO TO STEP 18
A
-
CHECK FOR INTERMITTENT PROBLEMS
NEXT
-
CONDUCT PARTS INSPECTION
NEXT
-
IDENTIFY PROBLEM
NEXT
-
ADJUST AND/OR REPAIR
NEXT
-
CONDUCT CONFIRMATION TEST
NEXT
END