REPAIR INSTRUCTION CUSTOMIZE PARAMETERS

Note


  • When the customer requests a change in a function, first make sure that the function can be customized.

  • Be sure to make a note of the current settings before customizing.

  • When troubleshooting a function, first make sure that the function is set to the default setting.

Tech Tips

The following items can be customized.


  1. POWER DOOR LOCK CONTROL SYSTEM

    Illuminated Entry
    Display Default Content Setting
    Lighting Time 15 s Function that changes the lighting time after closing all doors. (It will quickly fade out in case of turning the power switch from off to on (ACC) or (IG).) 7.5 s, 15 s or 30 s

  2. WIRELESS DOOR LOCK CONTROL SYSTEM

    Wireless Door Lock Control System
    Display (item) Default Function Setting
    Wireless Control ON Function that turns wireless door lock function on or off ON or OFF
    Hazard Answer Back ON

    When the doors are locked by wireless operation, the hazard warning lights flash once.

    When the doors are unlocked by wireless operation, the hazard warning lights flash twice.

    		 ON or OFF
    Open Door Warning ON The buzzer sounds when lock is pressed when any of the doors are ajar. ON or OFF
    Panic Function*1 ON Function to operate theft deterrent system by continuously pressing panic switch on transmitter for 0.8 seconds ON or OFF
    Auto Lock Time 30 s Function that regulates the interval between unlocking and automatic relocking of doors 30 s, 60 s or 120 s
    Wireless Buzzer Resp*2 ON Wireless door lock buzzer response ON or OFF
    Wireless Buzzer Vol Level7 Wireless door lock buzzer volume Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0

    • *1: w/ Panic Function

    • *2: for Australia

    Illuminated Entry
    Display Default Content Setting
    Lighting Time 15 s Changes the lighting time after closing all doors. (It will quickly fade out in case of turning the power switch from off to on (ACC or IG).) 7.5 s, 15 s or 30 s

  3. ENTRY AND START SYSTEM (for Entry Function)

    Entry & Start
    Tester Display Default Content Setting
    Park Wait Time 2.5 s Function that sets waiting time to permit opening door after door is locked with entry lock function 0.5 s, 1.5 s, 2.5 s or 5 s
    Ignition Available Area All Function that switches the entry hybrid vehicle control system start detection area Front or All
    Back Door Opening Operation* Long Function that opens the back door when the driver has the key and presses back door opener switch assembly (opener switch) Long, Twice or OFF

    • *: w/ Entry System Back Door Open Function

    Warning
    Tester Display Default Content Setting
    Key Low Battery Warning ON Function that warns driver that the key battery is weak ON or OFF

  4. ELECTRICAL KEY CANCEL (ENTRY AND START SYSTEM (for Entry Function))

    The electrical key cancel operation disables the following functions:


    • Entry Unlock/Lock

    • Entry Hybrid Vehicle Control System Start

    • Entry System Back Door Open Function*

      *: w/ Entry System Back Door Open Function

    • Electrical Key Lock-in Prevention

    • Warning


    1. The operation procedure is as follows:

      Precondition:

      Power switch off, driver door closed and unlocked.


      1. Push the unlock switch of the key once.

      2. Open the driver door within 5 seconds.

      3. Push the unlock switch of the key twice within 5 seconds.

      4. Close and open the driver door twice within 30 seconds.

        (Driver door: Close → Open → Close → Open)

      5. Push the unlock switch of the key twice within 5 seconds.

      6. Close and open the driver door within 30 seconds.

        (Driver door: Close → Open)

      7. Close the driver door within 5 seconds.

        When electrical key cancel is activated, the wireless door lock buzzer sounds twice.

        To return to the original condition, perform the procedure again. When the original condition is returned, the wireless door lock buzzer sounds once.

  5. ENTRY AND START SYSTEM (for Start Function)

    Entry & Start
    Tester Display Default Content Setting
    Ignition Available Area (Entry ignition available area) All Function to choose the available area for electrical key to start the hybrid control system. Front or All

  6. CUSTOMIZING FUNCTION WITHOUT INTELLIGENT TESTER (ENTRY AND START SYSTEM (for Start Function))

    Performing the following procedure disables the entry and start system.

    Tech Tips

    To start the hybrid control system while the entry and start system is disabled, follow the procedure for when the key battery is low Click here.


    1. The operation procedure is as follows:

      Precondition:

      Power switch off, driver door closed and unlocked.


      1. Push the unlock switch of the key once.

      2. Open the driver door within 5 seconds.

      3. Push the unlock switch of the key twice within 5 seconds.

      4. Close and open the driver door twice within 30 seconds.

        (Driver door: Close → Open → Close → Open)

      5. Push the unlock switch of the key twice within 5 seconds.

      6. Close and open the driver door within 30 seconds.

        (Driver door: Close → Open)

      7. Close the driver door within 5 seconds.

        When electrical key cancel is activated, the wireless door lock buzzer sounds twice.

        To return to the original condition, perform the procedure again. When the original condition is returned, the wireless door lock buzzer sounds once.

  7. THEFT DETERRENT SYSTEM

    Theft Deterrent System
    Display(Item) Default Content Setting
    Mech. Key Entry Alarm Cancel OFF Function that makes it possible to cancel the alarm with an unlock operation using the mechanical key. ON / OFF

  8. LIGHTING SYSTEM (LIGHTING INT)

    Illuminated Entry
    Tester Display Default Content Setting
    Lighting Time 15 s Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the power switch from off to on (ACC or IG).) 7.5 s, 15 s or 30 s
    I/L when ACC OFF ON Lights up power switch illumination, front interior lights, rear interior light and footwell lights when the power switch is turned from on (ACC or IG) to off. ON or OFF
    I/L ON W/Door Key Unlock ON Lights up power switch illumination, front interior lights, rear interior light and footwell lights when doors are unlocked using a mechanical key or door control transmitter. ON or OFF
    Light Control ON

    Dims (ON setting) or turns off (OFF setting) the footwell lights under the following conditions:

    Power switch on (IG), shift lever not in P, and all doors closed.

    		 ON or OFF
    Room Light when Aprchd ON Lights up the power switch illumination, front interior lights, rear interior light and footwell lights when a key enters any actuation area around the doors. ON or OFF
    Inside Foot Light ON ON/OFF of footwell light control function. ON or OFF

  9. METER / GAUGE SYSTEM

    Warning
    Tester Display Default Content Setting
    Key Remind Sound Slow Function to change the cycle of the key reminder buzzer Normal, Fast or Slow
    Driver Side Seatbelt Warning Buzzer*1 ON Function to turn on/off the seat belt warning buzzer ON or OFF
    Front Passenger Side Seatbelt Warning Buzzer*1 ON Function to turn on/off the seat belt warning buzzer ON or OFF
    Rear Seatbelt Warning Buzzer*2 ON Function to turn on/off the rear seat belt warning buzzer ON or OFF
    Reverse Buzzer Continual Function to change the type of the reverse warning buzzer Single or Continual

    • *1: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.

    • *2: w/ Rear Seat Belt Warning

  10. SEAT BELT WARNING SYSTEM

    Combination Meter
    Tester Display Default Content Setting
    Driver Side Seatbelt Warning Buzzer ON Function to sound the seat belt warning buzzer ON / OFF
    Front Passenger Side Seatbelt Warning Buzzer ON Function to sound the seat belt warning buzzer ON / OFF
    Rear Seat Belt Warning Buzzer* ON Function to sound the seat belt warning buzzer ON / OFF

    • *: w/ Rear Seat Belt Warning

  11. AIR CONDITIONING SYSTEM

    Air Conditioner
    Display (Item) Default Content Setting
    Set Temperature Shift Normal Function to control with the shifted temperature against the displayed temperature. +2 C, +1 C, Normal, -1 C or -2 C
    Compressor Mode Automatic Function to automatically turn the A/C on by pressing the AUTO button when blower is on and the A/C is off. Manual or Automatic
    Air Inlet Mode Automatic Function to shift from INLET mode to RECIRCULATION mode when the A/C is turned on. Manual or Automatic
    Foot/DEF Auto Mode ON Function to automatically turn the airflow from FOOT/DEF on when AUTO mode is on. OFF or ON
    Foot/DEF Automatic Blow Up Function ON Function to automatically increase the blower level when the defroster is on. OFF or ON
    Ambient Temperature Shift Normal Function to control the shifted ambient temperature in relation to the displayed ambient temperature. +3 C, +2 C, +1 C, Normal, -1 C, -2 C or -3 C
    ECO MODE Cancel OFF Function to cancel the ECO mode drive when item is on. OFF or ON
    Noise and Vibration Reduction OFF Function to change speed of the compressor when item is on. OFF or ON
    Start Pre A/C*1 Long1 Function to set the activation operation method for the remote air conditioning system using the key (electrical transmitter). 1 tim ON, 2 tim ON, Long1 or Long2
    Stop Pre A/C*1 2 tim ON Function to set the stop operation method for the remote air conditioning system using the key (electrical transmitter). 1 tim ON, 2 tim ON, Long1 or Long2

    • *1: w/ Remote Air Conditioning System

  12. LIGHTING SYSTEM (LIGHTING EXT)

    Light Control
    Display Default Content Setting
    Disp Ex ON Sen Normal Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock. Light2, Light1, Normal, Dark1 or Dark2
    Disp Ex OFF Sen Normal Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock. Light2, Light1, Normal, Dark1 or Dark2
    Response Time 0.1 s Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position 0.1 s or 1.0 s
    Sensitivity Normal Adjusts the sensitivity of the automatic light control system. Light2, Light1, Normal, Dark1 or Dark2
    DRL Function On ON/OFF of the DRL function On or Off