NOISE FILTER INSTALLATION


  1. INSTALL NOISE FILTER


    1. A01J8SK

      Engage the claw to install a new terminal cover to the wire harness.

    2. A01J8M1

      Engage the 3 claws to install the new terminal cover with the wire harness to a new condenser.

    3. A01J8PI

      Engage the clamp to temporarily install a new noise filter with the wire harness to the back door.

    4. Install the new noise filter with the bolt.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY


    1. A01J8I5

      Engage the 11 clips and 2 claws to install the back door panel trim assembly.